Fire Suppression Systems

Product Details:

 Engine compartments of buses are more tendency to catch fire than other enclosures due to the following: short circuit, engine wear, hot surfaces, reduced durability of materials, use of plastics, encapsulation of the engine, oil, and debris. It is not surprising that more than 70% of all bus fires occur in the engine compartment. Since buses are used for every day transport of people, the fire protection of buses should be top priority of every bus operator or manufacturer.

Product Details:

Wind Turbine Fire Supression for electric panel fire detection system.
The most widely used and most effective fire suppression systems in wind turbines are aerosol systems. A connected smoke/heat detector sends a signal to the aerosol system which immediately activates a discharge of the fire extinguishing agent.

Additional Information:

• Delivery Time: 4 week

Product Details:

Transformer Fire Suppression Systems for transformer fire.
Each transformer, located outside the building, is surrounded by a transformer explosion and fire prevention installation in the form of a cage, on which sprinklers are located. We design their number and positioning to ensure that the burning transformer is sprayed evenly with water.

Additional Information:

• Delivery Time: 4 WEEK

Product Details:

 Engine compartments of buses are more tendency to catch fire than other enclosures due to the following: short circuit, engine wear, hot surfaces, reduced durability of materials, use of plastics, encapsulation of the engine, oil, and debris. It is not surprising that more than 70% of all bus fires occur in the engine compartment. Since buses are used for every day transport of people, the fire protection of buses should be top priority of every bus operator or manufacturer.

Additional Information:

• Production Capacity: 9 KG
• Delivery Time: 4 WEEK

Product Details:

Clean Agent Fire Suppression System For Electrical Panel.
The system employs a specialist Clean Agent that provides rapid fire suppression, leaving no residue, non-corrosive and completely non-conductive. Combined with the detection and discharge at the source of the fire your system can be back up and running in no time.

Additional Information:

• Delivery Time: 4 week

Product Details:

FM200 Fire Suppression System : With a unique design and superior quality materials, this FM200 System works with a specialised mechanism which is useful for countering the class A, class B, class C and electric fires. The extinguishing agent used in this fire suppression system is HFC-227ea. The speciality of this agent is that it is extremely rapid and effective.

Additional Information:

• Delivery Time: 4 week

Product Details:

Gas Suppression SystemTOTALLY BASED ON GAS BASED FIRE SUPPRESSION SYSTEM AND ITS INDUSTRIAL USAGE. ITS EASY TO INSTALLATION

Additional Information:

• Delivery Time: 4 WEEK

Product Details:

Gas Based Direct Fire Suppression System for fire suppression.
Gas Fire Suppression Systems are used to extinguish electrical fires by releasing a concentration of gas within a particular room. Most commonly found in server rooms, computer suites and communication rooms a Gas Suppression system is responsible for protecting the integral functions of your business.

Additional Information:

• Delivery Time: 4 week

Product Details:

Aerosol Based Fire Suppression System for Industrial , commercial , offices.
Condensed aerosol fire suppression, a relatively new technology, is a system of aerosol containers or a single container, that are interconnected to each other and to a control panel, designed to extinguish fires in special hazard applications.

Additional Information:

• Delivery Time: 4 week

Product Details:

Fm200 Gas Based Fire Suppression Systems for Wind Turbine for electrical panel fires.
FM-200 is a clean agent fire suppressant for Class A, B, and C fires. It's a colorless, non-toxic gas that leaves no residue. For these reasons, it's an ideal solution for protecting high-value assets in areas that are occupied and in locations where the cleanup of other agents is problematic.

Additional Information:

• Delivery Time: 4 week

Product Details:

Wet Chemical Fire Suppression Systems for kitchen suppression.
Wet chemical suppression system is used to protect modern commercial kitchen from potential threats like open flame, red hot cooking surface and heavily grease laden environment which in turn leads to oil and grease fires. The system design complies with NFPA 96 and NFPA 17A Standards.

Additional Information:

• Delivery Time: 4 WEEK

Product Details:

Kitchen fire suppression systems can be designed to protect a wide variety of kitchen appliances, such as stoves or deep fat fryers. The nozzles for the fire suppression system are installed in the kitchen hood exhaust. That way, the wet chemicals will be discharged directly over the source of the fire.

Additional Information:

• Delivery Time: 4 week

Product Details:

ELECTRICAL PANEL FIRE SUPPRESSION
v Full-automation heating start, no electricity;

v High effectively;

v Simple Installation and maintenance;  

v Suitable for electric equipment;

v Refillable.

Additional Information:

• Delivery Time: 4 WEEK

Product Details:

MEIUM VELOCITY WATER SPRAY SYSTEM IS INDUSTRIAL SYSTEM AND INSTALLATION IS VERY EASY. Water Spray System is extensively used to protect the Transformers. Such Water Spray system are designed as per NFPA 15. 

Additional Information:

• Delivery Time: 2 TO 4 WEEK

Product Details:

WATER SPRAY SPRINKLER SYSTEM IS TOTALLY WATER BASED SPRINKLER TYPE SYSTEM AND ITS VERY IMPORTANT TO TANKS

Product Details:

Features:

• Patented Technology
• FPC Compound
• Non Pyrotechnic (Patented)
• Compact -strong solid
• Potassium Salts -K2CO3
• Certified Life -15 Years
• Self-activation Temperature at 300º C
• No chemical reaction with cooling materialHealth and Safety Features
• Global Warming Potential = 0
• Ozone Depletion Potential = 0
• Negligible Atmospheric Lifetime
• No Oxygen Depletion
• Non Toxic
• Non Corrosive

Product Details:

v Full-automation heating start, no electricity;

v High effectively;

v Simple Installation and maintenance;  

v Suitable for electric equipment;

v Refillable.

Additional Information:

• Delivery Time: 4 week

Product Details:

we are leading supplier of novec 1230 fire suppression system.we can provide you best quality product at very reasonable rate.

Product Details:

Wind Turbine Total Flooding System for fire suppression of wind turbine. The Indirect system utilizes Heat Sensing Tube as fire sensing ONLY. Suppression of fire is delivered via copper, SS or Braided pipe. The nearest surface of Heat Sensing Tube bursts due to heating it actuates the valve & agent discharges through strategically placed nozzles within protected enclosure.

Additional Information:

• Delivery Time: 4 WEEK

Product Details:

Novec 1230 Gas Suppression System for Wind Turbine system
is a kind of colorless ,tasteless,non-corrosive and electricity-insulating liquid,working become gas without residue and pollution after extinguishing.It is a friendly-environment gas to be used for extinguishing. Also, because of such feature, it can be used in special place where electrical fire is easy to happen

Additional Information:

• Delivery Time: 4 week

Product Details:

CO2 Based Fire Suppression System for Industrial ,
A fire suppression system is any product designed to stop a fire from growing and spreading. Fires can be extinguished, kept under control, or potentially avoided by using fire suppression systems. Typically they are activated by heat, smoke, or a combination of both.

Additional Information:

• Delivery Time: 4 week

Product Details:

Novec 1230 fluid extinguishes a fire before it starts by rapidly removing heat. In a typical total flooding system, the fluid is stored as a liquid in cylinders pressurized with nitrogen. Automatic detection sensors trigger release when the fire is at the incipient stage, extinguishing it in mere seconds.

Get the best price for Novec 1230 Clean Agent Suppression Systems 

Additional Information:

• Delivery Time: 4 WEEK

Product Details:

Clean Agent Fire Suppression System for Wind Turbine for Electrial parts and electrical panels.
Clean agents suppress fire by eliminating either the heat element or the oxygen elements of the fire. The most common agents are Inergen, FM-200 and Novec 1230.

Additional Information:

• Delivery Time: 4 week

Product Details:

High Voltage Transformer Fire Suppression System for high voltage transformer.
Fire protection water spray systems are used to cool a transformer to prevent damage if exposed to radiation heat transfer from a fire involving oil released from another transformer that has failed.

Additional Information:

• Delivery Time: 4 WEEK

Product Details:

Clean Agent Fire Suppression System for fire supression used.
By definition a clean agent is a gaseous fire suppressant that is electrically nonconducting and that does not leave a residue upon evaporation. This is ideal when protecting high value items like historical artifacts or sensitive electronic equipment.

Additional Information:

• Delivery Time: 4 week

Product Details:

Fm200 Gas Based Fire Suppression Systems for fire used in industrial , commercial usages.
Its technical name is 'heptafluoropropane' and it is a colourless, odourless halocarbon. FM200 extinguishes flames by removing the fire's free radicals, disrupting an element of the fire tetrahedron by effectively preventing the chemical reaction that allows a fire to burn.

Additional Information:

• Delivery Time: 4 week

Product Details:

Novec 1230 Fire Suppression System for Industrial For industrial fire suppression used.
Novec 1230 fluid extinguishes a fire before it starts by rapidly removing heat. In a typical total flooding system, the fluid is stored as a liquid in cylinders pressurized with nitrogen. Automatic detection sensors trigger release when the fire is at the incipient stage, extinguishing it in mere seconds.

Additional Information:

• Delivery Time: 4 WEEK

Product Details:

Novec 1230 Gas Fire Suppression System for electrical panel , industrial , offices ....................

Additional Information:

• Delivery Time: 3 TO 4 WEEK

Product Details:

Fm200(htc-227ea) is a kind of colorless and tasteless and non-corrosive and electricity-insulating gas without residue and pollution after extinguishing. And ODP of it is zero. It is a friendly-environment gas to be used for extinguishing. Also, because of such feature, it can be used in special place where electrical fire is easy to happen.

Additional Information:

• Delivery Time: 4 Week

Product Details:

Mild Steel Fm200 Clean Agent Fire Suppression System  

 

Additional Information:

• Delivery Time: 4 WEEK

Product Details:

Fm200 Clean Agent Fire Suppression System for Industrial , commercial.
FM-200 is a clean agent fire suppressant for Class A, B, and C fires. It's a colorless, non-toxic gas that leaves no residue. For these reasons, it's an ideal solution for protecting high-value assets in areas that are occupied and in locations where the cleanup of other agents is problematic.

Additional Information:

• Delivery Time: 4 WEEK

Product Details:

FIRE SUPPRESSION CNC
v Full-automation heating start, no electricity;

v High effectively;

v Simple Installation and maintenance;  

v Suitable for electric equipment;

v Refillable.

Additional Information:

• Production Capacity: 2 TO 22 KG
• Delivery Time: 4 WEEK

Product Details:

ELECTRICAL PANEL FIRE SUPPRESSION
v Full-automation heating start, no electricity;

v High effectively;

v Simple Installation and maintenance;  

v Suitable for electric equipment;

v Refillable.

Additional Information:

• Delivery Time: 3 WEEK

Product Details:

FIRE DETECTION TUBE SYSTEM
v Full-automation heating start, no electricity;

v High effectively;

v Simple Installation and maintenance;  

v Suitable for electric equipment;

v Refillable.

Additional Information:

• Delivery Time: 3 WEEK

Product Details:

FE36 FIRE SUPPRESSION SYSTEM
v Full-automation heating start, no electricity;

v High effectively;

v Simple Installation and maintenance;  

v Suitable for electric equipment;

v Refillable.

Additional Information:

• Delivery Time: 3 WEEK

Product Details:

Trace Tube Based Fire Suppression System
v Full-automation heating start, no electricity;

v High effectively;

v Simple Installation and maintenance;  

v Suitable for electric equipment;

v Refillable.

Additional Information:

• Delivery Time: 3 WEEK

Product Details:

Cold Fire Suppression System
v Full-automation heating start, no electricity;

v High effectively;

v Simple Installation and maintenance;  

v Suitable for electric equipment;

v Refillable.

Additional Information:

• Delivery Time: 4 WEEK

Product Details:

AUTOMETIC TUBE FIRE SUPPRESSION
v Full-automation heating start, no electricity;

v High effectively;

v Simple Installation and maintenance;  

v Suitable for electric equipment;

v Refillable.

Additional Information:

• Delivery Time: 4 WEEK

Product Details:

Tube Based Fire Suppression System, For Industrial , For Electrical Panel.Supremex Tube Based Fire Suppression Systems (Firetrace Systems) are Specially designed for instant detection and quick fire suppression. The heart of the firetrace system is the Linear Heat Sensitive pneumatic polymer tubing.

Additional Information:

• Delivery Time: 4 Week

Product Details:

Red Tube Based Fire Suppression System , For Electrical.KalpEX Red Tube Based Fire Suppression System, For Industrial. Novec 1230 & HFC 227 Tube Based Automated Pre Engineered Systems are reliable and cost-effective means to protect mission critical or high value assets with enclosures, against the risk of fire.

Additional Information:

• Delivery Time: 4 week